Author: Я. Date 2011-09-01 21:24:07, views: 2092, Raw
CPU Host Clock Contro [Auto] CPU Frequency(Mhz) = 200 Set memory Clock [Auto] / Manual Memory Clock x6.66 =1333Mhz / x4.00 / x5.33 / x8.00 DCTs Mode [Unganged] / Ganged DDR3 Timing items [Auto] / Manual 1T/2T Command [2T] CAS# Latency [9T] RAS to CAS R/W Delay [9T] Row Precharge Time [9T] Minimum RAS Active Time [24T] TwTr Command Delay [5T] Trfc0 for DIMM1, DIMM3 [90ns] Trfc1 for DIMM2, DIMM4 [110ns] Write Recovery Time [10T] Precharge Time [5T] Row Cycle Time [33T] RAS to RAS Deley [4T] **DCTs Drive Strength** DCT0 DCT1 ProcOdt(ohms) [Auto] =60 [Auto] =60 DQS Drive Strength [Auto] =1.0x [Auto] =1.0x Data Drive Strength [Auto] =1.0x [Auto] =1.0x MEMCLK Drive Strength [Auto] =1.5x [Auto] =1.5x Addr/Cmd Drive Strength [Auto] =1.5x [Auto] =1.5x CS/ODT Drive Strength [Auto] =1.5x [Auto] =1.5x CKE Drive Strength [Auto] =1.5x [Auto] =1.5x **DCTs Addr/Cmd Timing** DCT0 DCT1 Addr/Cmd Setup Time [Auto] =1T [Auto] =1T Addr/Cmd Fine Time [Auto] =22/64 [Auto] =22/64 CS/ODT Setup Time [Auto] =1/2T [Auto] =1/2T CS/ODT Fine Delay [Auto] =0/64 [Auto] =0/64 CKE Setup Time [Auto] =1/2T [Auto] =1/2T CKE Fine Delay [Auto] =0/64 [Auto] =0/64 Channel Interlaeving [Enabled] Bank Interleaving [Enabled]