CPU Host Clock Contro [Auto]
CPU Frequency(Mhz) = 200
Set memory Clock [Auto] / Manual
Memory Clock x6.66 =1333Mhz / x4.00 / x5.33 / x8.00
DCTs Mode [Unganged] / Ganged
DDR3 Timing items [Auto] / Manual
1T/2T Command [2T]
CAS# Latency [9T]
RAS to CAS R/W Delay [9T]
Row Precharge Time [9T]
Minimum RAS Active Time [24T]
TwTr Command Delay [5T]
Trfc0 for DIMM1, DIMM3 [90ns]
Trfc1 for DIMM2, DIMM4 [110ns]
Write Recovery Time [10T]
Precharge Time [5T]
Row Cycle Time [33T]
RAS to RAS Deley [4T]
**DCTs Drive Strength** DCT0 DCT1
ProcOdt(ohms) [Auto] =60 [Auto] =60
DQS Drive Strength [Auto] =1.0x [Auto] =1.0x
Data Drive Strength [Auto] =1.0x [Auto] =1.0x
MEMCLK Drive Strength [Auto] =1.5x [Auto] =1.5x
Addr/Cmd Drive Strength [Auto] =1.5x [Auto] =1.5x
CS/ODT Drive Strength [Auto] =1.5x [Auto] =1.5x
CKE Drive Strength [Auto] =1.5x [Auto] =1.5x
**DCTs Addr/Cmd Timing** DCT0 DCT1
Addr/Cmd Setup Time [Auto] =1T [Auto] =1T
Addr/Cmd Fine Time [Auto] =22/64 [Auto] =22/64
CS/ODT Setup Time [Auto] =1/2T [Auto] =1/2T
CS/ODT Fine Delay [Auto] =0/64 [Auto] =0/64
CKE Setup Time [Auto] =1/2T [Auto] =1/2T
CKE Fine Delay [Auto] =0/64 [Auto] =0/64
Channel Interlaeving [Enabled]
Bank Interleaving [Enabled]